How Much Does Injection Moulding Cost Per Part? What Protolabs Actually Charges

Injection moulding cost per part is the question every product designer asks first, and the honest answer is that nobody can quote it from a headline number. What you pay per part is decided by tooling life, cavity count, inspection requirements and how far along your design is. Protolabs, the digital manufacturing service in our catalogue, publishes enough of its terms to show exactly where those levers sit — and where a small team’s budget actually goes.

The short version: your prototype mould can be free once you move into on-demand production with the same supplier, but the tooling behind it has a guaranteed shot life, and that guarantee is where the price separates from the production track.

Two tracks, two tooling stories

Protolabs runs two distinct injection moulding offers, and the difference between them is the single biggest driver of per-part cost for a small team.

  • Prototype injection moulding is built for iterating — design and material changes, cost and manufacturability tradeoffs, typical quantities under 2,000 parts. Tooling here is guaranteed for at least 2,000 shots, and stored for 18 months of inactivity.
  • On-demand manufacturing is for when the design is final and run-to-run consistency matters. Tooling is stored for 3 years of inactivity, and the order ships with a Quality Inspection Report (QIR) verifying Protolabs’ process controls, plus a scientific molding process development report.

That is the cost mechanic in plain terms: you are not just paying for plastic, you are paying for how long the tool lives and how much paperwork proves the parts are right. A prototype tool that only needs 2,000 shots costs less than a production tool with in-process CMM inspections with GD&T and a full suite of secondary operations attached.

Where the per-part number actually comes from

Four things move the number, and all four are visible in Protolabs’ own published terms:

  1. Quantity band. Prototype work sits under 2,000 parts. Above that, you are in production territory and the tooling, inspection and qualification documentation all change.
  2. Tooling guarantee. 2,000 shots versus an open-ended production tool changes amortisation completely. Spread a tool across 500 parts and you pay four times what you pay spread across 2,000.
  3. Inspection depth. The prototype track does not carry a QIR. The production track does, along with scientific molding reports. That is real cost per part, and for regulated work it is non-negotiable.
  4. Cavitation. Family and multi-cavity moulding is listed as an additional capability — more cavities means more parts per cycle and lower per-part cost, but a more expensive tool up front.

Protolabs also notes that design consultation is free with a single supplier, which matters more than it sounds: every DFM fix you catch before cutting steel is money not spent on a re-cut tool.

What the business side tells you about pricing pressure

Protolabs is a public company, so its quarterly numbers are public too. In Q2 2026, revenue reached $149.3 million, up 10.6% year over year, with injection molding revenue growing 13.1% and GAAP gross margin rising to 46.4% from 44.3% a year earlier. The company raised its full-year 2026 revenue growth guidance from 6–8% to 8–10%.

Read that as a buyer, not an investor: injection moulding demand is growing and margins are expanding. A supplier with pricing power is not the one cutting rates to win your next prototype run. If anything, the trend argues for locking in tooling decisions earlier rather than assuming next year’s quote will be friendlier.

What this means for a small team quoting a part

If you are an industrial designer or freelancer taking a part from CAD to first shots, the decision rule is straightforward:

Stay on the prototype track if you still expect design or material changes, your quantity is under 2,000, and you do not need qualification documentation. You get parts in days and a tool guaranteed for at least 2,000 shots.

Move to on-demand manufacturing if the design is frozen, run-to-run consistency is critical, or a customer requires a Quality Inspection Report and scientific molding documentation. You will pay more per part — but you are buying qualification, not just plastic.

Before you request any quote, run a DFM pass. Protolabs offers free design consultation; use it. The cheapest per-part cost in the world is useless if the tool has to be re-cut because a wall thickness or draft angle was wrong in the first revision.

Speed is part of the price

Protolabs advertises injection molding parts as fast as 1 day, with ISO 9001:2015, ISO 13485:2016, AS9100D and ITAR certifications listed on the service page. For a team working against a launch date, turnaround speed has a cost of its own — and a supplier that can hold those certifications while quoting in days is competing on more than price.

The bottom line on injection moulding cost per part: it is a function of tooling life, quantity, inspection depth and cavitation — in that order. Get those four answers in writing before you compare any per-part price, and the quote will make sense instead of surprising you.

Sources

Get the next one by email

Occasional, honest write-ups on design tools — including where they fall short.

No spam, unsubscribe in one click. Privacy.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.